As Don said, you just need to bend the case out a little to clear the keyer connector. You didn't mention it, but I assume you removed the tuning knob.
I had a similar failure to turn on a while ago and found that the switch wasn't working. I just sprayed it with contact cleaner and worked it a few times and it has been ok since. Bernie W1AZ On Wednesday 31 December 2008, MASH wrote: > New Year Greeting Everyone: > It has been a longtime since I buit the KX1. I turned on the > radio to find it would not turn on. The lamp goes on. I am > trying to find the fuses. They must be on the underside of the > board. I am having trouble removing the board. I removed the 3 > screws from the front panel. This still does not remove the > board. The keyer connector seems to be sticking. Any advise is > welcome on this problem. > Happy New Year, > Cliff, AC6C > -- > MASH > mash4...@mailsent.net _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
