I haven't tried the data modes; I am mainly a CW guy. But what I would like to be able to do is this: when I'm on CW and a RTTY station fires up on top of me, I'd like to just hit a switch and send a preprogrammed RTTY QRL message to the RTTY op. Is this possible? If there was a dedicated one-button function for this in the firmware, I think it would be great.
73, Drew AF2Z On Tue, 06 Jan 2009 19:59:31 -0800 (PST), Don...w2xb wrote: > >Hello all, >Just want to thank all that responded to my cry for help.I was trying to get >the cw to psk to work with my key. Well after many hours trying to get it to >work,with no luck. I finally sent an e-mail to K3support. Gary responded >very fast.(like always). We checked out everything and I still didn't think >I was putting out a psk signal. Finally Gray relayed to problem to Wayne, >who suggested that I do a factory reboot. First I backed up my memories and >setting with the "Utility". Can't say enough for that great piece of >software. Then did the reboot. Tried cw to psk with the key again. Still >sounded the same. So got an e-mail from Wayne and he suggested that I call >him to see if we could work it out.Making the call and talking to him, he >keyed his rig in the cw to psk mode and I listened on the phone.Whaaaa! > The same sound I was getting out of my rig.HANG MY HEAD IN EMBARASSMENT!! >There was nothing wrong with the rig or setup. I was just used to hearing >the tones from the soundcard setup. Boy talk about a senior moment...... > The best thing I did that saved me lots of work was backing up my rigs >settings on the "utility program" Just did a restore and the rig was back to >where it was before the hard boot. > I have worked several stations using the cw-psk with the key and really >think its neat. > Just thought that I would pass this info on to all. And really like to >thank "Gary and Wayne for the great support. Don't think you can get any >better support than "ELECRAFT" > >Many thanks > >Don...w2xb _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
