Hi Roy. There is NO provision for transmitting PSK-D from the ACC connector. This feature is ONLY for using the paddles connected to the paddle input. If you are going to use a computer you have two options:
1. Put the radio in PSK-D and decode with the software and send with the paddles; or 2. Put the radio in Data-A mode and have the software handle both decode and encode. 73 Greg AB7R -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Roy Davis Sent: Monday, January 12, 2009 2:19 PM To: [email protected] Subject: [Elecraft] Unable to do PSK I have a digital question. I am using the ACC port on the K3 to do RTTY (FSK D). I have a box that was made for me with the appropriate parts for this function. The cable with the box from the ACC is connected to a com port on the computer. Also I have a audio cable (Stereo) connectors on each end going from the Line out of the K3 to the Line In on my desktop computer. It works very well on RTTY. I decided to try PSK, and have tried the following method without success. Since theis cable worked with RTTY in FSK-D I thought it should work for PSK. I tried the same setup with the K3 with DATA MD set to PSK-D 31 bps. I am able to transmit a signal but I have been told there is no printout on the receive end. Any help is appreciated. Thanks, Roy - WK4Y #1366 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
