Randy, There is nothing wrong with using a stereo plug on both ends. You can use an already constructed (purchased) stereo cable - the connector in the K3 is stereo, but wired for mono (that is nothing connected to the ring), so you will not be shorting the soundcard output. If you build your cable, you may wire just the tip and the sleeve. The tip is normally the left channel and the ring is the right channel.
73, Don W3FPR K8RDD wrote: > I was wondering if anyone knew which is the left and right channels on a pc > sound card out to hook to the line in on the K3. Left is A and B is right > but which is which on the connector? I assume I use a mono on the K3 side > and a stereo connector on the pc side. I'd like to try digi on this beasty. > Randy > K8RDD > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
