Tom, Have you checked to see if the sidetone source is correct? Enter the menu for ST L then press EDIT to edit the parameter - then tap DISPLAY to toggle the source between U6-25 and U8-4 - stop tapping when you hear sidetone.
73, Don W3FPR [email protected] wrote: > I am not getting a sidetone on my K2. I have run through the > troubleshooting section for the sidetone and have reason to suspect > something is up with U8, the D-A converter. I have 5V on pin 1 of U8 > and the corresponding pin of Q5. There is no AC signal from U8. > The sidetone was working in phase 1 of construction. What else can I > check to determine if it is the D-A converter? > > Thanks! > > Tom > KB3PNU > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
