Re: [Elecraft] Locked VFO on 40 Meters K2

Tue, 27 Jan 2009 07:52:52 -0800

Problem solved: 

While in the RATES menu I apparently had changed the type of scanning to something other than normal by tapping the DISPLAY switch.  When I returned the type of scan back to scn nor the problem was solved.  Operator error.................


Thanks to the K2 Nifty Mini Manual for the information.

73
To All
Tom WØUY
 
======================================================================================
Tom Lappin WØUY wrote:

I changed the RATES setting while on 40 meters from 3R to 3C and now the VFO is locked at 7100.00.

I have cycled through the Rate/Lock switch several times and the VFO is not locked from there,  it is displaying nor.

I have changed RATES back to 3R but no help, VFO stays at 7100.00 while turning the VFO knob.

All other bands operate normally.

Solutions or Suggestions please!

Thank you in advance

Tom WØUY
#6615
 

_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to