One thing to check: In DATA mode, press and hold the PITCH button. The displayed mark and shift frequencies must match MMTTY or whatever decoding program you are using. Which program or TU are you using?
Dave Hachadorian, K6LL Yuma, AZ ----- Original Message ----- From: "N1IX" <[email protected]> To: <[email protected]> Sent: Sunday, February 01, 2009 9:17 PM Subject: [Elecraft] K3 RTTY problem I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no display of anything on any of the RTTY applications. No waterfall, nothing at all. I have tried different computers and multiple applications with the same results. I have adjusted the line out item in the config menu to full scale. I plugged headphones into the line out jack I can hear the RTTY signal but it seems to be attenuated. Although I don't know how loud it should be. BTW: transmit doesn't work at all. That will be the subject of another email. Any help would be appreciated. Dave N1IX -------------------------------------------------------------------------------- > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
