Subject: AM radio K3
Here is what I found about my K3 100W, with the KBPF3 General
coverage band-pass filter array and the AM filter installed. The AM
radio coverage fair on the upper end and noisy on the lower freq.'s.
So I installed the KXV3 RF I/O module as directed by Elecraft
personnel.
Now the sound is excellent on both the #1 and #2 antenna's when
connected to the KXV3 BNC connector RX ANT in.
How ever when connected to a inside AM antenna I receive hardly any
audio.
Elecraft personnel have suggested a LOOP antenna, home made which he
uses on his K3 and works great.
I do not have time to make one so I have purchased one on line and
am awaiting it's arrival to give it a try.
If you are not familiar with a LOOP antenna google it and see the
demos and how it is used.
I am hoping for the best, good luck to yall.
Duane
w6ddr
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
