Not sure if this is a question or observation. Saturday I was setting up a DEM transverter to be used with a K3 and found the low level output of the K3 is dependant upon the input attenuator setting on the DEM transverter. I set the max output on the K3 in the menu to 1.8 dbm , which the rig displayed. When the DEM was adjusted for max attenuation, the K3 showed 1.8 dbm but when I turned the attenuation pot on the DEM transverter to decrease the attenuation and get more output, the output of the K3 dropped to .7 dbm as noted on the K3 readout. A assume this is because the 10m input of the DEM is not 50 ohms but it just surprised me after dealing with many other rigs. I guess even the low level output is ALC controlled which would probably explain it. Terry - W8ZN
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
