OE5CSP-Chris wrote:
>
> After installing the latest Beta firmware and utility I realized, that the
> K3 does not pull out more than 85 watt on some bands. The power is set to
> 100 watt. Did anybody notice that?
>
Have you done the TX Gain calibration on every band (there is a wizard to do
this in the K3 Utility)?
I do notice the power measured by my AV-600 power meter is about 80W on 160m
going up to 90W on 20m and staying at that level right thru 6m. I have
calibrated the K3 at 5W and 50W using a DL1 and DMM which should be pretty
accurate, and I calibrated the AV-600 at the same power levels. Given the
accuracy of most amateur power meters is generally given as no better than
10% of FSD, and the K3 power sensing probably has no better accuracy, I
would say that this is within the limits of measurement error. The
difference between 85W and 100W is not going to be noticeable anyway.
-----
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Firmware-bug--tp2268444p2269043.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
