Harvey, You may have inadvertently changed the transmit filter for CW or SSB around the time you updated the firmware. Use either K3 Utility or the configuration menu to set the SSB transmit filter to your 2.7 or 2.8 kHz filter. ERR TXF is telling you that the wrong transmit filter bandwidth has been set. See page 65 of the manual.
73, Don W3FPR Harvey wrote: > The test mode doesn't operate like it did with previous firmware revs. > I'm using an MH-2 mic with K3 s/n 2231 with firmware 2.78. When I key > up, vfo B shows 'ERR TXF' and I can hear myself in the speaker. When > I unkey I can't key the mic again without pressing any key pad on the > front panel to reset the error on vfo B first. Am I doing something > wrong? I used to be able to key the mic repeatedly in the test mode > without any error hangups. > > Harvey KN6VP > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
