You can turn it on/off on a per band basis but not on a per direction basis. I still think that you should be able to use the RX ant path in some manner. Depending on what you're trying to do. Although I'd still need to take a closer look at the block diagrams again but I thought the RX path was pretty much straight in.
Depending on where the RX ANT OUT port comes from you may be able to short the out back into the IN and then use a tap from where ever the out comes from (hopefully before the ATU). On Fri, 2009-02-06 at 00:07 -0800, AD6XY wrote: > > > Brett Howard wrote: > > > > Can't you use the RX in path since you have the XVRTR interface? > > > > > > No, not if you are using one antenna. I do not yet have an ATU, this was a > general question, can you configure the K3 to bypass the internal ATU on > receive. I suspect yes. You might want to do this if you were on 80m and > listening for openings on 40m using a dipole for example. > > Mike ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
