Hello After the high bands fade out; I usually do some MW listening... this evening - the rig is decidedly insensitive on both the K3 and KRX3 - both with general coverage and 6 khz filters. PREamp helps - but not enough - TS-2000 beside the K3 is normal ( levels are about 3 x stronger). signals on 80 meters are normal. I reloaded all firmware/DSP etc to no avail. A station that should read 9 plus 10-20 db reads 4. ATU is bypassed. Attenuator off.
Fixed - still posting this for those who might find the same thing - changing mode to LSB immediately made the K3 come-alive - and still ok when going back to AM.... Note - band changes, K3 on/off; firmware reload did NOT change things. I consider it a 'minor' bug 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3--suddenly-lost-AM-sensitivity---bug---partial-fix-tp2295152p2295152.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
