Hello Stewart! Be sure you use the PITCH control to select the tone pair you desire to use. The K3 will then display the RF frequency corresponding to the RTTY Mark tone. As you change pitches, the frequency display won't alter but the offset of the radios suppressed carrier will move in accordance with the selected PITCH.
If you engage the dual tone RTTY filter, it will be set up for the selected PITCH. Be sure the RTTY program is set to the same pitch. Some programmes are waterfall-based and change the Tx tones to match the Rx tones. If you are using such a program, you may be better off with DATA A, and if you want LSB then hold ALT to change sidebands for DATA A so that you see the LSB icon. IN thie case of using DATA A, the radio will display the suppressed carrier frequency rather than the MARK frequency. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
