Hi Phil,
If the 30L-1 keying input, with its very high negative voltage, was ever
hooked directly to the K3's keying output, there is a very good chance
you may have destroyed the K3s output keying device.
Eric WA6HHQ
Phil LaMarche wrote:
I've had many wonderful emails with suggestions and I thank you.
Let me be more specific: The Amp Keyer works OK. The 30L-1 keys OK.
The tested cable coming out of the Key Out on the back of the K3 isn't
working properly. It's in the closed position. If I take the other
end of the cable from the Key Out and plug into the amp keyer, it keys
it without my keying the K3. If I hook it direct to the 30L-1 it keys
the amp. I'm presuming the circuit is faulty in the K3? Ideas?
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
_www.instantgourmetspices.com_ <http://www.instantgourmetspices.com/>
www.w9dvm.com <http://www.w9dvm.com/>
800-395-7795 pin 02
727-944-3226
FAX 727-937-8834
NASFT 30210
K3 #1605
W9DVM
------------------------------------------------------------------------
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
