One of the necessary steps is to set the K3's CONFIG:AUTOINF to AUTO 1 so that the K3 sends band data on its RS232 port. Could that be the issue?
Dick, K6KR From: [email protected] [mailto:[email protected]] On Behalf Of Jim Spears Sent: Monday, February 09, 2009 8:38 AM To: [email protected]; [email protected] Subject: [Elecraft] K3 to SteppIR interface communication I recently replaced Icom stuff with a K3. Now I am trying to get all the stuff in the shack that is supposed to communicate with each other to do so. Right now I am working on the K3 to SteppIR interface. I have a clone of the SteppIR "S13" cable and the K3 is connected directly to the SteppIR "Data In" port. The SteppIR interface is set to "KENW" at 9600 bps; the K3 RS232 is set to 9600 bps. SteppIR does not follow band changes. Anyone got a suggestion for getting this interface to work? Jim N1NK
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
