[email protected] wrote: > I just received a "new to me" K3. It is a recent serial number 18XX. The > receiver works > fine but there is no output power. It goes into transmit the transmit light > illuminates.? but no power at all in any mode or on any band nada, nil,? > zero!!!? I > have checked all the obvious things. I took the covers off and could see > nothing that > looked wrong. Anyone have any ideas?
Make sure CONFIG: TX INH is OFF. Either Hi or Lo will prevent transmi if the TX INH pin on the accessory socket is not connected. If you connect a paddle, do get a sidetone when you key it? If you are trying to transmit SSB, are you sure the correct mic connector and bias setting is selected? -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
