If you're using Data A, make sure the CONFIG:PTT-KEY setting is correct to actuate TX. For example DTR-OFF lets the DTR signal key the TX. Digipan can accommodate this too.
Data A is a good choice for this. The K3 is an excellent data radio and this mode supports PSK31 quite well. 73, matt On Thu, 12 Feb 2009 00:37:30 -0600, you wrote: >OK, Stupid question, I can't believe I can't get this running. > >PSK31 operation PC to K3, Digipan (then HRD/DM780 when I get it figured out, >one thing at a time). > >Windows XP pro, Digipan, both signals checked on the comm 1 port for transmit, >NO Rigblaster, serial cable direct to 1.7 gig PC, sound "card" on the mother >board, K3/100 (plus options). > >What mode am I supposed to have the K3 in? > >1. Data, Data A, vox or not = won't go into transmit. > >2. USB mode, goes into transmit and transmits data as expected except that the >frequency is 600 Hz above the VFO setting and does not follow the waterfall >frequency. > >Works fine on 746 through original Rigblaster, I didn't think it was supposed >to be needed on the K3. > >TIA, 73, de Jim KG0KP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
