Rich, That is an excellent solution - I don't normally use the K3 Utility Command Tester or Terminal window for things like that, so I just did not think of it. I am more of a 'knobs and buttons' guy except when I am running digital modes.
Along that same line, it may be that visually impaired K3 operators may do well to download and study the K3 Programmer's Reference manual to see if issuing commands through K3Utility or other terminal programs would be an easy way to set up the K3 for any particular set of operating conditions. Setting up macros/memories in K3 Utility may also be helpful. 73, Don W3FPR Richard Ferch wrote: > There are software commands that can be used to select any of the K3's four > data submodes. > > The DT0; command selects DATA A, DT1; selects AFSK A, DT2; selects FSK D and > DT3; selects PSK D. > > If you are using the K3 Utility, you can use the Command Tester to send one > of these commands to ensure that the K3 is in the desired data submode. > > 73, > Rich VE3KI > > Don W3FPR wrote: > > >> I am not certain how hams like you and Gary would know the correct >> setting for the mode and DATA MD unless you first have a sighted helper >> or other assist to read the display. >> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.234 / Virus Database: 270.10.23/1949 - Release Date: 02/11/09 > 08:01:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
