Hi! > The below is the procedure I use to activate TX EQ. TX EQ does not save > when powered off. (I am not changing mode or band). Also RX EQ setting > becomes the same as TX EQ and vice versa. Both are changed to what ever > EQ number is selected. No matter if you do it from TX eq or RX > eq. Anyone else see this? Support is working on it. Running fimware 2.78 > > 1. Select EQ5 by touching the kepad number 5 after you are in menu > item TX EQ. > > 2. Tap menu again to go back to read out. > > 3. Go back to menu item EQ and the selection of EQ5 is still there. Tap > menu to return to freq reading. (and RX EQ has been changed to EQ 5 also) > > 4. Turn off power. Turn on power. Tap menu. Find TX EQ. It is now > set back to EQ 1 not EQ 5.
The number reported following "TX EQ" or "RX EQ" is the frequency band that is being equalized, not the setting of the equalizer. To demonstrate that the EQ *settings* are in fact saved, insert these steps: 1a) rotate VFO A to clockwise so VFO B's display reads " 0.80 +2". The fifth location in VFO A will be two parallel horizontal lines " = " showing that the 800 Hz frequency range has been boosted slightly. 4a) Note that the fifth location in VFO A is still two parallel horizontal lines " = " showing that the 800 Hz frequency range has been boosted slightly. Thus, the adjustments made before cycling power are saved through power cycles. --- What has *not* been saved is the fact that the last frequency band you were *adjusting* was band 5. Thus "TX EQ 1" is displayed, showing that any adjustment you make will be to frequency band 1 (50 Hz). Simply tap keypad 5 to go back to adjusting the 800 Hz frequency band. Finally, while in TX EQ adjust mode, press the CLR button near the RIT knob to restore the default (flat) EQ settings. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
