Brett, Yes, the KAT2 HiPwr indicator only comes on when the KPA100 switches in (that happens at power levels of 11 watts or more) - without the KPA100 it will always be in low power. There is no difference in tuning, it is only an indicator.
73, Don W3FPR Brett Gazdzinski wrote: > I received part of my order to combine the kat100 and the kpa100 into the > ec2 box, I got the rs232 interface and the kat100, and built both, no > problems, no missing parts, as usual. > One thing I notice though, when I adjust the power of the k2 past 10 watts, > the kat100 tuner does not change to hi power. > Does it only do that if I have the kpa100? > > Everything else works like it should, antenna a/b, tunes my alpha delta > dx-lb-plus to at least a 1.3 to 1 on all bands. > > Time to order the 160 meter and noise blanker options! > The alpha delta does 160, and the street light out front of my house goes on > and off causing a racket in my radio! > > I also did the ssb filter bandwidth mod, SSB sounds REAL nice! > > Who needs a K3! > > Brett > N2DTS > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
