BigAlT wrote:
>
> You only need to connect a TMP cable to J92 on the KRX3 if you want to
> use an auxiliary input for the KRX3 ( either via the BNC connector that
> comes with the KRX3 or via the KAT3 antenna terminal that is not being
> used for the main RX and TX, you can use only one of these options ). If
> you don't want to use an auxiliary antenna at all you don't have to
> connect anything to J92 on the KRX3. See pages 24 thru 29 of the KRX3
> installation/operation Manual Revision C.
>
You might want to wire up AUX RF BNC/TMP assembly even though you have no
immediate plans to use it. You can route the TMP cable and tape it safely
out of the way. This will save a LOT of work later if you ever decide you
need it.
73, Bill
--
View this message in context:
http://n2.nabble.com/K3-KRX3-Clarification-tp2331790p2332015.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
