Julius: If it is conventional 8AWG wire, it probably will fit in the 45A crimps for the Anderson Power Pole Connectors. Those same contacts fit in the enclosures that fit our Elecraft PP. Just be cautious when crimping it down. If you have access to the Anderson Die Crimp tool rather than the West Mountain Combo, I would recommend using that one.
Tim Raymer K2 #1383 73 de KA0OUV -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Julius Fazekas Sent: Monday, February 16, 2009 07:47 To: [email protected] Subject: [Elecraft] 8 AWG adapter I have some really nice 8AWG cable for my power line. Connecting to the PS is not a problem, but haven't figured out an "elegant" means to drop it down to use with 30A PP connectors. Any ideas? Thanks, Julius Fazekas N2WN Tennessee Contest Group TnQP http://www.tnqp.org/ Elecraft K2/100 #4455 Elecraft K3/100 #366 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
