Gary, The TEXT DEC button acts like the menus - you must change VFO B to ON or OFF and VFO A changes the threshold for the decoder.
The 'IM' character issued from the paddles should stop transmission without a pause. If there is a character buffered by the K3 (as there will be if using the K3 utility or a memory), then the buffer must clear before transmission will stop. If you simply stop sending, transmission will stop 4 seconds later. 73, Don W3FPR Gary Lee wrote: > How do I turn text dec off? Tried issuing "swh40;" no dice. I thought it > would act as a toggle. > Also, noticed when sending that "..--" does not immediately kick me out of > transmit mode as the manual states. > > Running firmware 2.78. Issuing commands with hyperterminal. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date: 02/16/09 > 06:55:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
