Hi all I just rejoined this list so if these matters have been covered recently, my apologies.
1. I have K2 #6404. I'm really pleased with it, but.... there is one slight glitch. When I tune up the power drops to about 75% of full. I move the power control a tiny amount, and it jumps back to the correct power. This means I - press tune - twiddle the power control - operate. Every time. Is this a common glitch? Is there updated firmware? Any advice at all? 2. I am considering getting the 100w PA and ATU. I cant decide whether to go for the PA in the K2, or house both PA and ATU in the EC2 seperate enclosure, thus allowing my QRP K2 to be seperated when its required. Does the EC2 option require any more hardware than housing the PA in the K2? Anyone give any thoughts on either of these options? 3. Any chance of splitting this mailing list into two mailing lists. One for K3 and one for everything else. I get the feeling any non-K3 owners have moved on by now. Thats why I left this list. 99% K3. I'm not knocking the K3, but I dont plan to own one, so its kinda dull reading. cheers folks Jack VK2CJC / MM0AXL Mid North Coast Amateur Radio Group www.mncarg.org
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
