I am not sure if they match the output of the W1's red leds. IF they do perfect. Can anyone test?
Bill -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom, N5GE Sent: Friday, February 20, 2009 10:47 AM To: Ken Kopp Cc: [email protected] Subject: Re: [Elecraft] W1 LED Part Numbers On Fri, 20 Feb 2009 03:52:17 -0000, you wrote: >I have a "set" of additional green and yellow LED's >from Scott at Aptos. He got them for me from the >stock bins and didn't include their stock numbers. > >I'll light them with a PS and see if their all the same >brightness and take a photo. > >They -should- be the same product line and therefore >light equally, I'd think. They're from the KAT-100 >tuner. > >Scott was at least receptive to making all the W1 >kits with three colors of LED's. > >73! Ken Good information, Ken. Last night just before crawling into the sack I realized another source of the Elecraft PN's might be the LED's used in the power out displays of the XVTR's. You can probably get them by downloading one of the XV*** manuals. 73, Tom, N5GE K3 806 XV144 XV432 http://www.n5ge.com http://www.swotrc.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
