>Dave Wrote...but did apply all of the applicable hardware mods to date. So hopefully the distortion is not hardware related but operator error in driving my soundcard too hard.
Dave, When I have my K3 Line Out plugged into my sound card rear microphone input I see IMD products that I don't see when I plug into the Line In on the PC soundcard. It is difficult for me to know which one I am plugged into because I do not understand the color code on the PC sound input output panel. The only way I make sure I am plugged into Line In is to bring up the Windows microphone panel and mute all inputs but Line In and make sure that I am getting a waterfall trace with only Line In selected. If no noise on the waterfall I plug into another socket until I finally arrive at Line In. I found this made quite a difference on my set up when I finally plugged into the correct place. Mike Scott Tarzana, CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
