Don, thank you for answering! This K2 used to work, but after I got my K3, it was left in the background... It will tune to a good SWR. The K60XV option is not installed.
73 Svend, OZ7UV ----- Original meddelelse ----- > Fra: Don Wilhelm <w3...@embarqmail.com> > Til: Svend Spanget <span...@privat.dk> > Cc: elecraft@mailman.qth.net > Dato: Lør, 21. feb 2009 19:57 > Emne: Re: [Elecraft] K2 deaf on 40 m > > Svend, > > Is this a newly built K2, or one that used to work and has now > failed. > Do you have the K60XV option? > If it is newly built, check to be certain you have installed C6 (on > the > bottom of the RF Board near the rear panel) correctly. Its leads > should > be in the outer holes of the set of 3 holes between L1 and L2. > > If you installed the headers for the K60XV option (or the rework > eliminators), you must insert the board into J15. Does it receive on > 60 > meters? > > If this is a K2 that worked before, there is likely some failure in > either in the Bandpass Filter or the Low Pass Filter. > Does it transmit on 40 meters? > > 73, > Don W3FPR > > > Svend Spanget wrote: > > Hi all. > > > > My K2 is working fine on 160m, 80m, 30m and 20m but not 40m. I have > > switched between ANT1 and 2. RANT is OFF. Nothing helps... > > What went wrong for me? > > Any settings to check or could it be a hardware failure? > > > > 73, > > Svend OZ7UV > > ____________________________________________________________ TDC Bredbånd for 0 kr. - Spar 695 kr. Se http://tdc.dk/freemailtilbud/ Denne mail er sendt via Mail på TDC Online - Læs mere om TDC's mailtjeneste på http://mail.tdconline.dk/ ____________________________________________________________
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html