Don Rasmussen wrote:
>
> Julian,
>
> The transmit equalizer may be to blame for the thin audio reports.
> Although the FM audio does max at 2.8 khz, which is "sufficient", the
> equalizer is mode sensitive so the preferred setting for SSB is not good
> for FM.
>
> The receive audio may also sound thin on FM unless the higher Eq bands are
> increased.
>
> http://www.zerobeat.net/mediawiki/index.php/K3_Equalizer_Facts
>
> If you can set the transmit EQ to all maximum, set the deviation
> to 5khz, and report the results to the list (satisfactory to your
> friends using your microphone) that would be good to know.
>
>
I prefer to keep the EQ flat because I mostly use data modes and
equalization is positively not wanted in that mode. If we had per-mode EQ
settings then things would be a lot better, but that is still quite a long
way off apparently.
-----
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/blog.html G4ILO's
Blog http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-FM-issues-tp2384506p2384543.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
