Bill, It sounds like the 40 meter frequency is incorrect - the K2 detects that during a CAL PLL attempt. Do you have the K60XV installed or the rework eliminator for the K60XV option? If so, enter the secondary menu and once again set D19 = "y" - your master reset would have wiped out that setting.
You will have to re-do all your filter settings - hopefully you wrote them down. 73, Don W3FPR Bill Strong wrote: > I reset the EEPROM on my K2 SN#4454 because it stopped responding to COM PORT > 1 commands from Ham Radio Deluxe. This cured this problem but now when I > turn the radio dial the frequency readout changes but the frequency is not > changing only on the 40 meter band. I am attempting to run CAL PLL but I > keep getting the 232 error code. I have tried 7100.00 and several > frequencies between 7000.00 and 7100.00. I have the frequency counter probe > connected to TP1. > > I would appreciate any suggestions. > > Thanks > Bill Strong > WA5KPE > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.237 / Virus Database: 270.11.3/1971 - Release Date: 02/25/09 > 06:40:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
