Hi Ron I am using the K3/ FL7000 combo.
I did not have to put in any pull up resistors. The auto band change works fine although wiring up the plugs was a bit tricky/ tedious - but well worth doing. I also did the ALC mod to the K3 and whilst it works with the FL7000 it is rather unstable. The ALC level and hence the amplifier current continuously varies over a small range. I did follow up Elecraft about this problem but got a wishy washy sort of response which didn't help with the problem. So I turned the ALC off and operate without it. It is very simple to set the power out from the K3 to run the amplifier power you want. I usually run mine at 400w out which is the legal limit here. 73 Barry VK2BJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
