Ron D'Eau Claire wrote: >I've had the cables all over the place. There seems to be only one >cable whose placement has a significant effect on birdies. That's the >long (10"/25cm)cable running from J84 at the bottom of the Auxiliary >KSYN3 board to J85 on the KRX3 RF module. It should be dressed as shown >in Figure 47 in the KRX3 manual. In some cases it helps to keep it away >from the tiny toriods on the mixer board as well. Either run it across >above the mixer board as shown or work it down under the mixer board so >it loops up between the mixer board and the front panel shield to J85 >on the KRX3 RF module. >
Thanks, Ron. -- 73 from Ian GM3SEK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
