I have not used the K2 in some time, and tonight I notice that both 60m and 40m sound dead (all signals are very weak) and I have no power output- I have not measured with an inline meter but there is nothing on the K2 display. All other bands seem fine.
I have the KAT2 in CALS mode since I use an external autotuner and I can see the swr drop as I transmit on bands other than 60 or 40, but I (sometimes) get a Lo P warning when I hold in the tune button on 60 and 40m. I wonder if anyone has any bright ideas? The K2 has sat in its travelling case for the past several weeks so has not seen any action, except that is, that I opened up the case to install a new sealed lead acid battery. I have just re-opened it and cannot see anything I might have disturbed. Thanks Stephen G4SJP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html