Damon, Well, I haven't heard that problem in a long time, but the solution is easy. On the top of the Control Board, just to the right of center is a switch to change the voltage display from external to internal - you must have bumped it in the upgrade process - set it to the INT position and all will be well.
73, Don W3FPR W4HDM wrote: > HI, > > OK I am just finishing up the A to B mod and somewhere at the end between > Misc control board changes and sidetone Modification or possibly after the > XFILMDKT I am getting "Low Battery" warning and "000" reading for voltage > when tapping Display. This is with power coming from a power supply and not > the internal battery. > > I did miss a pin count on the sidetone mod and fixed that. (used pin 7 > rather than 6) and for the 82-mH inductor, I missed a pin by one as well > (using pin 8 and 10 rather than the proper 7 and 10) and this has been > fixed. > > And it was all going so well! > > Thanks in advance! > > ----- > W4HDM-DAMON-K2#473 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
