I do not operate SSB very much, but I wanted to get my Microham MicroKeyer working with N1MM for "voice keying". I have the Heil Proset Ic from Elecraft and it works well plugged into the 1/8" mic jack of the MicroKeyer and the MicroKeyer mic output is plugged into the rear panel mic jack of the K3. FB thus far.
Now, when trying to record in N1MM, I get nothing. The interval of the recording is correct but apparently there is no audio getting from the mic to the soundcard. I have tried all of the audio switching options. The preamp jumpers are both set to ON, but I tried setting them OFF and it made no difference. Is this an issue with using the Ic model Proset? In the past, with other radios I have used a standard Proset with HC4 and have not had any trouble. I do not have that headset any longer though, so I can't try it out. The main reason for doing this is so my XYL does not hear me saying my callsign over and over which drives her crazy. This is another reason I prefer CW and RTTY! With voice keying, I could continue to operate without her knowing it! Has anyone else been through this with the Proset Ic reaching a solution? Thanks, Bob W5OV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
