I believe you should check with Heil since I believe that microphone has a balanced output, it requires a special cable. If the microphone has a three pin XLR connector on the output, it is indeed a balanced circuit and needs a special cable. I use a PR 40 with my K-3. I believe the cable I bought from Heil is the same one you need for your microphone. I'm not sure what you would use a "trigger" for, except possibly to shoot the mike if it does not work well for you. As far as I know I have no trigger and no problem.
Bruce-W8FU -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of James Sarte Sent: Sunday, March 08, 2009 4:40 PM To: [email protected] Subject: [Elecraft] Heil PR-781 and K3? What do I need to interface this microphone to my K3? To my understanding, the K3 uses the same pin configuration as a Kenwood, so would all I need is this mic, a trigger, and a Heil Kenwood cable?? 73, James KC2UEE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
