OK - I have yet to use my K3 on 6m where the default of being on LSB for CW makes this much more difficult. I think I understand what you're getting at although you could just change your CW to be USB - no?
All my previous 6m rigs were defaulted to USB for CW so going from CW to USB or the reverse made no change in what I heard in the receiver - presuming the bandwidth remained the same of course. -----Original Message----- From: Radio Amateur N5GE [mailto:[email protected]] Sent: Saturday, March 21, 2009 4:04 PM To: Robert Naumann Cc: 'Elecraft' Subject: Re: [Elecraft] K3 Feature Suggestion (CW) On Sat, 21 Mar 2009 10:46:33 -0500, "Robert Naumann" <[email protected]> wrote: >Why not just listen in CW mode? Is there a difference? Yes. You might be surprised how many new grids I have grabbed by sending CQ in CW and waiting for someone say QRZ? on phone. When they do, I answer on phone. SSB operators working weak signal who don't speak Morse, still answer CW signals on 6m and up. It's a way of getting their attention. Don't forget CW still gets through noise better than phone. That's exactly the reason you CAN send CW while in SSB on the K3. The Elecraft guys know that we do that, so they put in a feature that many of us use for weak signal work. > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Radio Amateur N5GE >Sent: Saturday, March 21, 2009 10:20 AM >To: Elecraft >Subject: [Elecraft] K3 Feature Suggestion (CW) > >I use CW almost exclusively. > >When I'm on 6m up, working weak signal, I send CQ in CW while the rig >is set to USB. In the CW memories M1, M2, M3 and M4, I have messages >stored for calling CQ, etc., but when the mode is set to USB and I tap >one of the memories, naturally I get a memory saying the DVR is not >installed, which is correct. > >How much trouble would it be to do an if/else check for the DVR and if >it isn't present, send the CW memory? > >It's not a show stopper, but would be nice to have for those of us who >may never install the DVR. Or perhaps setting a software switch that >would let us choose which memories we want to send from? > >Not a show stopper, just a thought. > >Tom, N5GE > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
