Bill, Had the same thing once. Reloaded the firmware and that solved the problem here.
73 Arie PA3A -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens KB1PXD Verzonden: zondag 22 maart 2009 15:07 Aan: [email protected] Onderwerp: [Elecraft] [K3] No Power Output Hello everyone, as of last evening, my K3 is no longer indicating any power output on the RF meter during transmit. I've tried both PTT and VOX, as well as 2 different antennas. (dipole & beam) When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but the SWR indicator above only displays "- -". I've gone through all the settings and they look correct. The PWR knob is fully clockwise, I'm not in test mode, etc., etc. I've sent an email to Elecraft but I thought I'd check here as well to see if anyone has seen this behavior. Thanks, - Bill KB1PXD -- View this message in context: http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
