> I have both the XG1 and the XG2. What I would like is to convert the XG1 > to either 160 or 10M. If this is possible I would buy another XG1. Can > anyone suggest any ideas on this and if it doable and component values? > > The reason I want both 160M and 10M: > For 160M I could use the XG1 to test and check receive loops. The XG1 > could be a signal source connected to a loop. I presently use an MFJ > antenna analyzer for this. > > For 10M I could use the XG1 to test coax loss. I keep a record of all my > coax loss going to the tower and the other antennas. Instead of dragging > out the dummy load I could use the XG1 as a signal source on the end of > the coax and check on the receiver in the shack for approximate loss. > > 73, > N2TK, Tony ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
