----- Original Message ----- From: "Erik N Basilier" <[email protected]> To: "wayne burdick" <[email protected]> Sent: Wednesday, March 25, 2009 12:34 PM Subject: Re: K3 Tuning encoder pulses and birdie problem
> With the DSP NR at F1-4, the encoder tics as well as the normal noise > totally disappear, with preamp on or off. > F1-3 or lower still has both the tics and normal noise. F2-3 vs F2-4 works > the same way. > I am running 2.76; guess I should update and try again. > > ----- Original Message ----- > From: "wayne burdick" <[email protected]> > To: "Erik N Basilier" <[email protected]> > Cc: "Elecraft Reflector" <[email protected]>; "David Gilbert" > <[email protected]> > Sent: Wednesday, March 25, 2009 12:20 PM > Subject: Re: K3 Tuning encoder pulses and birdie problem > > >> Erik N Basilier wrote: >> >>> I can just barely hear the birdie on a dummy load around 28005, but it >>> is so >>> weak that it is not a problem. >>> >>> When a real antenna (beam or vertical) is connected, the encoder pulses >>> is >>> no problem at my rather noisy QTH. At 1kHz bandwidth the S-meter >>> indicates >>> S3 with AGC on, and the encoder pulses cannot be heard. >> >> If you turn the DSP noise blanker on at a low setting -- say t1-4 -- do >> the noise tics get suppressed to a large degree? >> >> tnx >> Wayne >> N6KR >> >> --- >> >> http://www.elecraft.com >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
