Thanks for all the replies to my 'problem'. Dave was right I had the amp key rca cable plugged into the PTT jack. All is well in kb2mland once again...
73 Jeff kb2m -----Original Message----- From: Dave G4AON [mailto:[email protected]] Sent: Saturday, March 28, 2009 5:19 PM To: [email protected] Subject: Re: [Elecraft] amp tune Jeff, sounds like you are connecting your linear keying line to "PTT IN" and not "KEY OUT" as you think you are... Check the connection. 73 Dave, G4AON K3/100 #80, Acom 1000 ---------------------------------- I'm trying to setup my K3 to tune my tube amp. I have TUN PWR set to 25 watts. when I long press the tune button the K3 goes into transmit at the selected 25 watts, in CW mode, but the amp doesn't key. If I press the PTT on the mic the amp goes into tx. I must have a menu set wrong? The only connection to the amp (other then the coax!) is the RCA connector key out on the K3. on Tuner is in bypass, ext ALC is OFF. Any ideas?? 73 Jeff kb2m ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
