I suppose if you REALLY wanted to do this you could use a second PR6 and run your RX ant to the PR6 input and the output connected to the AUX RF connector if its installed and KRX3 set to BNC. Then usinging a HOLD of the RX ANT button select the AUX position.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Thu Apr 2 7:39 , "Andy GD0TEP" sent: >OK Bud, that answers that question then... thanks. > >73 Andy >http://www.gd0tep.com > > >-----Original Message----- >From: Bud Semon N7CW [[email protected]','','','')">[email protected]] >Sent: 02 April 2009 14:57 >To: 'Andy GD0TEP'; [email protected] >Subject: RE: [Elecraft] K3 and PR6 question > >Hi Andy, > >There was a fairly long discussion between Wayne, W0MU and myself on this >subject, mostly on the reflector. The answer was no - you can't use the PR6 >(as installed on the radio) inline on the 2nd receiver to monitor 6M while >operating on other bands. > >73, Bud N7CW > >-----Original Message----- >From: [email protected] >[[email protected]','','','')">[email protected]] > On Behalf Of Andy GD0TEP >Sent: Thursday, April 02, 2009 5:57 AM >To: [email protected] >Subject: [Elecraft] K3 and PR6 question > >Hello to the group. > >I must be missing something in the manual... > >If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on >the sub receiver that is connected to the antenna via the BNC RX antenna >(with the SUB indicated on the display) is the PR6 pre-amp in line with the >sub receiver or not? > >73 Andy >http://www.gd0tep.com > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: [email protected]','','','')">[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: [email protected]','','','')">[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
