Arie, Are you changing bands from the K3 band up/dn button or are you using some software program to select the bands?
73 Greg AB7R On Apr 3, 2009, at 10:39 PM, Arie Kleingeld PA3A wrote: > Loaded FW 3.06 yesterday. All OK except.... > > This morning I cycled through the bands and found 6 meters missing. > I am sure that 6m is mapped in. Checked that with K3-EZ and in the > config. > > What happens is this: > Cycle up through the different bands and after the 10m band comes > 6m? No > band noise, not even with pre-amp on. > AND the display says 30.000.00 > Touching the VFO changes the display to 29.999.99 and the band noise > comes in. So probably I'm back at 10m. > > Another thing I tried was this: > Switch to config and go to the band mapping. > Cycle through the bands until you reach 6m, and yes it is mapped in. > Leave config. > Display is at 30.000.00 and K3 reacts the same as mentioned above. > > > Only band I have mapped out is 60m. > > > Am I the only one with this problem? Or maybe I've missed something. > > > 73 > Arie PA3A > K3 #1255 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
