Frank, No need for it to go on "The List" - it is reality now. You can set it up for any combination of 'which 0-9 button corresponds to each band' - make your own decisions on that. See "Quick Memories" in the manual, the CONFIG:MEM 0-9 and CONFIG: BAND SEL in the menu listing. There is also information retaining the "last used frequency" addition in the firmware release notes.
73, Don W3FPR W6NEK wrote: > That is an outstanding suggestion Joe! > Simple and elegant. I hope it makes it to "The List"! > > Frank- W6NEK > > ----- Original Message ----- > From: "Joe Subich, W4TV" <li...@subich.com> > Sent: Saturday, April 04, 2009 4:27 PM > Subject: Re: [Elecraft] K3 Assembly > > > <SNIP> > >> All that's necessary is to set "MEM 0-9" to "Band Sel" in >> the configuration menu. After that, M->V followed by 1 >> through 0 will recall the last used frequency/mode on each >> band 160 -> 6 (1 = 1.8, 2 = 3.5, 3 = 7, 4 = 10, 5 = 14, >> 6 = 18.1, 7 = 21, 8 = 24.9, 9 = 28 and 0 - 50 MHz). >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
