BG wrote: My only nit-pick refers to the (routing) of the green toroid wire L2-1 from the LPF1 module to the KX-1 BOARD. The errata sheet gives the 100% correct procedure, but practicality told me it won't work.
------------------------ For the record, all the Elecraft assembly procedures are developed actually doing the assembly with the eyes of a relative novice, then documenting what works. The photos are actual photos of the unit being built. Once the assembly procedure is developed, a number of field testers build kits using the same procedure, reviewing and critiquing the illustrations and the wording of each step. Only after their inputs are evaluated and the manual revised does it get printed for shipment with the kits to customers. Then feedback from customers are constantly evaluated and change made accordingly, but from the very first unit shipped, the assembly procedure has been documented by actually doing it step-by-step as shown and tested to be sure it works. Experienced builders will sometimes take shortcuts or have their 'own way' of doing things. That's FB, but someone just following the manual as written will end up with a properly working rig meeting all Elecraft standards. Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
