Fellow Elecrafters,
Having a problem with testing the KAT1 (Rev CR board) in a K1 (Rev E)
radio. The radio and 4-band filter board are fully tested but I cannot
get past the '---' in the ATU menu for checkout.
I've checked Vcc and Vdd on the micro-controller (Rev 1.30) and its
5.9v. I've double checked all solder joints, removed and re-inserted
the MCU and ensured that both connectors are seated properly as well.
This board is so simple.. have I a duff MCU or is there something else I
can look for at this stage?
Thanks for the help,
Ron
--
-=-------------------------o---------------------------=-
Ron Hahn, EI2JP | Grid: IO62TG
Rose Hill | WAI: T11
Rosslare Strand | QRP-ARCI: 12584
County Wexford | Fists: 10883
IRELAND | NAQCC 2471
__+__
--
This message has been scanned for viruses and dangerous content by MailScanner,
and is believed to be clean.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
