Larry, I would guess that your download of 3.06 was corrupt. Try downloading it again.
73, Don W3FPR North Pole wrote: > > Last night I decided to try my first firmware upgrade and load the newest > betaware revision 3.06. Having a little trouble finding the 3.06 I first > downloaded, successfully, firmware 2.78. I listened to the receiver briefly > and all was fine. However, I wanted to try the soft decay and longer hold, > slower agc settings featured in the 3.03 release. > > I figured 3.06 was the latest and successfully loaded it to my K3. > Unfortunately, when the transceiver returned to normal operation it produced > the most god awful piercing, deafening, howl in my sounds sweet spkr it > scared me. hi! The K3 display locked up with s meter lcd bars fully lighted > to 60 over 9 and no way to turn rig off, change bands or modes. Removing the > 14 volt power supply was the only remedy but then the rig came on the same as > it went off but waiting 3 to 4 minutes or more would gradually return to > normal ssb receive. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
