Ok...The keyer issue is a dead duck. Once I recovered from my temporary 
insanity I realized I was thinking of my IC-7000.
BTW: The best antenna for CW is a Windom. The dits and dahs automatically 
flow to the appropriate side of the feedpoint which insures proper 
transmission ratio. Just be certain your Windom is fed at the 1/3 point. If 
both receiving and transmitting stations are using Windoms, fading is 
virtually eliminated. One should take care to install the wire parallel to 
the ground otherwise dits or dahs will be missing, depending on the 
direction of the slant.
Steve Ellington
[email protected]
----- Original Message ----- 
From: "WILLIS COOKE" <[email protected]>
To: "Elecraft_List" <[email protected]>; "dw" <[email protected]>
Sent: Friday, April 17, 2009 1:53 PM
Subject: Re: [Elecraft] keying ration control


>
> My MESCO (Manhatten Electric Supply Company) Key built circla 1910 has 
> infinite dit-dah space ratio control.  Manual of course.
>
> Willis 'Cookie' Cooke
> K5EWJ
>
>
> --- On Fri, 4/17/09, dw <[email protected]> wrote:
>
>> From: dw <[email protected]>
>> Subject: Re: [Elecraft] keying ration control
>> To: "Elecraft_List" <[email protected]>
>> Date: Friday, April 17, 2009, 10:48 AM Before rolling my own, I talked to 
>> one designer who
>>
>> Thanks Steve for mentioning this.
>> Its been one of my frustrations as a cw op.
>> I finally ended up programming my own PIC keyer in order to
>> get my last
>> rig (non elecraft) RF output right.
>> There are no manufactured keyers that provide separate
>> dit/dah/space
>> ratio control.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to