James, ERR DSE indicates a DSP firmware problem (no response). Consider also that you could have a corrupt file on your computer. So yes, download a new copy (or the new beta version) and re-load the K3. Be certain to load the DSP Data Tables too.
73, Don W3FPR James Sarte wrote: > Was in the middle of a 10m QSO tonight, and all of sudden no power. Got > this message on the LCD: > > > > E 0400Cd ERR DSE > > > > Don't have a manual in front of me, so I'm not able to check at the moment. > This is the first time I've come across such an error in the time I've had > my K3. > > > > I was running about 5 watts. Antenna SWR was 1.2:1. Firmware is 3.10 > > > > Any thoughts? I'm going to try to upgrade to 3.11 tonight to see if this > happens again. > > > > 73, > > James K3JPS > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.287 / Virus Database: 270.12.1/2071 - Release Date: 04/21/09 > 08:30:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
