These messages don't indicate a failure. The K3 Utility sent a command to the K3 to reset itself to enter the boot loader. It's a progress status message, not an error message.
I considered wording the message to "Resetting K3 to enter boot loader", but I think I'll just remove the message instead. I apologize for any confusion. Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of wa6riv Sent: Wednesday, April 22, 2009 6:11 AM To: [email protected] Subject: [Elecraft] [K3] Boot loader failure (solution) I had an update failure this morning. "MCU firmware file hmcu0311.hex verified Reset K3 to enter Boot Loader" In the Elecraft K3 Utility, I tested communications. "4800 bps" I selected default. "Keep speed at 38,400 bps" Load error occurred. I reset my communications to 4800 bps and all worked fine. TNX Ted WP4CW Window Vista ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
